Shower room cleaning and maintenance skills and maintenance precautions
1. Shower room cleaning and maintenance
1. When cleaning the four walls and chassis of the shower room, please use a soft dry cloth. If there is slight dirt, please use a soft cloth or sponge neutral detergent to clean. Wash, clean. When removing stubborn stains, please use Remove alcohol.
2. When using the bathroom detergent, please use it correctly according to the precautions on the container. Wrong use method will have bad influence on people, and it is easy to cause some bad things in the product.
3. Do not use the following items for cleaning: acidic, alkaline solvents, chemicals (such as hydrochloric acid), propionic acid diluents and other solvents, decontamination powder, etc., otherwise it will have bad effects on the human body and cause products. There are some unhealthy conditions.
2. How to use and maintain the pulley in the shower room
1. Push-pull shower room currently has two methods: sliding block and sliding wheel.
2. Problems that should be paid attention to in the use of pulleys and sliders.
(1) Avoid. Avoid reinstalling the sliding door forcefully below, so as not to cause the sliding door to fall off;
(2) Pay attention to regularly clean the pulley and sliding block, and add lubricant (lubricant or slip wax;
(3) Regularly adjust the adjustment screw of the slider to ensure that the slider has an effective bearing and good sliding on the movable door.
Three, the maintenance of tempered glass
1. Do not hit or hit the glass surface with sharp objects to avoid damage.
2. Do not wipe the surface of the glass with corrosive liquids, so as not to damage the surface gloss.
3. Do not wipe the glass surface with rough materials to avoid scratches.
Four, aluminum alloy frame maintenance
1. Electrostatic powder spray products (such as white, antique, yellow, red, purple and other solid spray products) are first protected. Avoid direct sunlight and exposure, because the resin material and color base powder will have a photosensitive reaction, causing the spray layer to fade ;Secondly, no corrosive liquids or materials can be used for wiping; thirdly, rough materials (including toothpaste) cannot be used to wipe the surface; fourthly, sharp objects cannot be used to describe the surface, such as stains on aluminum materials, please use a neutral detergent to dissolve water Wipe afterwards.
2. Oxidation coloring products (gold, silver, matte silver, wire drawing and other surface coloring); these products are not easy to fade compared to electrostatic spraying products, but their hardness is poor, and it is not possible to use sharp objects to describe the surface. If stains appear on the aluminum surface, please use a neutral detergent to dissolve in water and wipe it off.