Points to note in the waterproof construction of the shower room
Shower room manufacturers remind everyone that if the area of the shower room in Jinan is not large, the small shower room is not well ventilated, it is easy to cause moisture in the shower room, especially the furniture in the bathroom is affected by moisture. Waterproofing the shower room can greatly alleviate the problem of dampness. The main shower room with poor ventilation should be waterproofed during decoration. Try to choose brand waterproof materials and paint in strict accordance with the construction process. The key to moisture prevention is to stay as low as possible. Or reduce the movement of the shower room plumbing.
If you want to change the pipeline, the waterproof construction details should be more strict. Not only the pipeline needs to be horizontal and vertical, and the laying is firm. The root of the pipeline must be cleaned and painted 2-3 times before applying the waterproof material. The main reason is the floor drain. Set at the lowest point on the floor of the shower room to facilitate the discharge of running water.
After the waterproofing project is completed, a 24-hour water avoidance test must be carried out to block the drain of the Jinan shower room, and the shower room should be 3-4 cm thick. Check for leakage after 24 hours. If there is no leakage, the waterproof layer must be checked. Can successfully waterproof.
In addition, the shower room valves, faucets and other pipe fittings should also be waterproof, coats, exposed pipes should be painted with anti-corrosion paint, and hidden pipes should be painted with anti-corrosion paint. The water supply pipes and accessories and appliances should be connected tightly, and there should be no leakage after the water test. Ceramic Such sanitary ware, stainless steel and other hardware (shower nozzles, faucets, etc.) should be given regular care. It is best to use toothpaste and toothbrushes for decontamination. The friction is small but the cleaning effect is excellent. It will not destroy the protective film on the sanitary ware and effectively prevent the production of mildew.
