How to close the glass of the shower room?
The wet and dry separation of the bathroom in home decoration is already the normal layout of most home decoration. In this way, the design of wet and dry separation is not only a clean, safe or sanitary design, but also a design worthy of promotion. Therefore, installing glass shower rooms is a very common way of decoration.
1 alloy or stainless steel trim
This method is relatively common in ordinary home decoration. The glass is wrapped with an alloy or stainless steel frame, and then the frame is fixed to the wall.
2Hardware fixing
During the installation, the glass is clamped by an accessory (glass clamp) as shown in the figure below. After the glass and hardware are fixed by hardware, the hardware is fixed to the wall.
This method requires hardware to be fixed to the wall during installation. There will be a certain gap between the glass and the wall surface after installation, which will make the shower room's sealability not good. If the shower room's sealability is pursued Just look at the first or third option.
3 glass glue
Glass glue is used to install and fix glass. Generally, it is used in combination with hard mounting. In the early stage of construction, the grooves in which the glass is inlaid are left. After the glass is put on, it is fixed with glass glue.
