1. Cleaning water stains on glass
For example, water stains often exist on the glass of our glass bathroom or on the glass door. Especially after taking a shower, there may be a lot of water stains left. Cleaning these water stains is actually not particularly complicated. I personally recommend the following processing methods to everyone.
①: Use spray cleaner to clean. Spray cleaner is very simple to use. We spray it on the glass once, roughly in an X shape, so as to ensure that the entire range is covered. Then wipe the wrung out rag in one direction, so that you can basically wipe away the water stains on the glass. Then wipe it again with a dry cloth. At this time, the wiped glass bathroom will be as bright as new.
②: You can use old newspapers for cleaning. Because the ink on old newspapers can make the glass brighter and can also scrub away some stubborn stains. I guess many friends have tried this method. But everyone must pay attention to the fact that the open water on the glass room should be wiped with a damp rag first, and then used to wipe it with old newspapers. This will have a better effect.
③: Treatment of some stubborn stains. For example, if a glass house is not cleaned in time after being used for a long time, it will cause a layer of stains to stick to it. This layer of stains is actually more difficult to clean. In fact, for these very stubborn stains on the glass, I personally recommend that you mix water and vinegar into a mixture. Then use a damp cloth dipped in the mixture to wipe it clean. These stubborn stains can basically be wiped clean.
④: You can also try another method, which is to use plastic wrap and detergent to work together to make the glass as bright as before. The specific method is that we first spray cleaner on the glass, and then put plastic wrap on the surface of the glass after spraying the cleaner. Keep this for about ten minutes, and then the stains will soften. After ten minutes, we can tear off the plastic wrap and wipe it clean with a wet rag. Then it will be as beautiful as ever.
⑤: Simple processing method. For example, if there is no detergent or plastic wrap in our shower room, there are actually many simple ways to deal with it. Here I will give you a brief introduction. The most common method is to pour a small amount of shampoo into the basin and then stir it into a solution. Finally, use a rag dipped in this solution to wipe the glass, so that the glass can be wiped very clean.

2. Treatment of stains in the corners of the bathroom
The above briefly introduces to you how to deal with some water stains and stains on the glass of the glass shower room. But everyone should know that there are still many corners in the glass bathroom. For example, the areas where I did not apply glue, the areas where the glass room meets the wall, etc. These locations are particularly susceptible to mold growth over time. Therefore, these parts also need to be cleaned regularly to ensure that they do not become blackened. For this reason, I personally recommend the following methods to everyone.
①: Treatment of stains on bathroom glass door seams. For example, the glass door in our bathroom can usually be opened and has hinges, so there are many gaps. Most of these gaps have their own sealant, so this area is particularly prone to stains. Conventionally, we can use toothpaste to brush. Use toothpaste to brush these areas back and forth until they are clean.
②: Treatment of some yellow water stains in the corners. You will find that after using the glass bathroom in our home for a period of time, some yellow water stains are prone to appear in some corners. For these yellow water stains, it is generally difficult for us to wipe them off. Special cleaning agents can be used at this time. We also sprayed these areas with detergent, then waited for a few minutes and then wiped them with a wet cloth. Basically, they could be wiped clean.
③: For mold on the sealant, please do not use hard objects to clean it. Like many friends who found that the sealant of our glass house has become moldy and turned black. At this time, we cannot use hard objects to scrape it. Because we usually can't wipe it off, but if we scrape it with a hard object, it is easy to damage the sealant and cause water leakage. The most common method at this time is to buy detergent, spray the detergent on these sealants, and then cover them with plastic wrap. Same as above, wait ten minutes, peel off the plastic wrap, and wipe it with a damp linen cloth. It can basically be wiped clean.
The glass bathroom installed in our home must be cleaned regularly. Because if we don't clean it for a long time, the water stains may become more and more serious, and eventually stick to the glass and some corners, making it difficult to clean. Therefore, when we usually take a shower, we can use a solution mixed with shampoo and use a rag to clean it, so as to ensure that our shower room is clean and tidy. Finally, I would like to remind everyone that during the installation process of the shower room, you must use anti-mildew sealant, so as to ensure that some corners and parts are protected from mold as much as possible.

