The solution to the clogged shower head

A shower can bring a touch of comfort to our tired body, but if the nozzle is blocked during the shower, no water can flow out, I believe everyone should be very annoyed. What should I do if the shower head is blocked? In order to avoid such unpleasant things from happening, we must know how to clean the shower head; what causes the clogged shower head? How to deal with it? These are all things that need to be considered when you encounter problems. Below, I will tell you how to solve the clogged shower head. I hope it can help you.

Causes of clogged shower head

If the shower nozzle is used for a long time, the water output will become smaller, which does not mean that the shower nozzle is broken, this is a natural phenomenon. Because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet, causing the shower to be blocked. In addition, most of the inorganic salts (including heavy metals) dissolved in the water, organic matter, bacteria, viruses, etc. are also present in the water, breeding impurities, and accumulating over time, leading to blockage.

The solution to the clogged shower head

1. If it is due to the poor quality of the shower nozzle, you need to pay attention to the quality of the shower nozzle when purchasing, and choose the shower nozzle with qualified quality. Generally, you need to go to a regular large-scale commodity inspection to buy, and you should not be greedy for small and cheap. Choose shower nozzles made of plastic and other products, but copper shower nozzles, to prevent the shower nozzles from clogging, cracking and other quality problems.

2. If the blockage is caused by the shower for a long time, we need to clean the shower nozzle regularly in our daily life. Generally speaking, white vinegar can be used to eliminate water scale. The specific method of use is: clean up every three months, disassemble the shower nozzle and soak it in a basin filled with white vinegar for 4-6 hours. Clean up the nozzle and install it back. The scale will flow out after the water is passed, so that the effect of cleaning the scale and eliminating bacteria can be achieved.

How to clean the shower head

As the styles and structures of showers are different, some can be disassembled and some cannot be disassembled. How to disassemble should be analyzed according to the actual situation. Of course, if it can be disassembled, it will be easier to clean; here are several cleaning methods:

1. Soak in weak acid

After removing the shower head, put it in a small basin filled with white vinegar (oxalic acid, Jiefangling) and soak for about two hours. After soaking, scrub with a toothbrush and then clean it with water; if there is hard water sediment, just Scrub with lemon slices.

2. Use toothpicks or needles

For severely clogged shower heads, you can use toothpicks or fine needles to poke the holes until there are no impurities in the holes. After the puncture, you can soak it with a weak acid, so that you can dredge the nozzle well.

3. Use rust removal lubricant

If the metal part of the nozzle is rusted and the blockage is very serious, then use WD-40 rust removal and antirust lubricant. This rust removal lubricant can have very good affinity and permeability with metal, and can separate the rust layer from the metal layer, so that the rusted part and the metal contact surface, and leave a protective film. Let the shower never rust to death.

Precautions for shower head cleaning

1. Pay special attention not to use strong acid (white vinegar is better) to avoid corrosion on the shower surface.

2. The use environment temperature of the shower head should not exceed 70℃, high temperature and ultraviolet light, which will accelerate the aging of the shower head and shorten the service life. Therefore, the shower head should be installed as far away as possible from the heater and other electrical heat sources.

3. Be careful when piercing the shower hole with needles, and don't damage the shower hole.

4. If the shower has a certain number of years, you can choose to replace it with a new one to avoid the accumulation of harmful bacteria and impurities in the shower, which may affect your skin health.

5. Before the end of each shower, use a towel to clean the water outlet of the shower to prevent the remaining scale.