Knowledge

Shower Room Company | How to solve the problem of water accumulation in the overall shower room?

Jan 16, 2021 Leave a message

Shower Room Company | How to solve the problem of water accumulation in the overall shower room?

 

After installing a shower room at home, some families found that water would accumulate when taking a bath, and the water seepage capacity was completely useless. They didn’t understand what caused it and couldn’t deal with it, which caused a lot of inconvenience to the shower life. Let me tell you how to deal with water accumulation in the shower room:

3-1PGZ92042244

1. When installing the floor drain in the shower room, many masters will choose to dig a square hole in the floor tiles only. Because the floor tiles are flat, unless the floor drain is at the intersection of the four floor tiles, it is difficult for the water in the shower room to completely flow to the floor drain.


2. The floor drain returns to the glyph, the middle is lower than the surroundings, and it should be recessed, which is more conducive to the drainage of stagnant water. In addition, the floor drain of the shower room is best designed in the corner of the wall, and the slope is easy to find and the water is easy to drain.


3. The placement of the floor drain will affect the integrity of the stone, and the construction will not be convenient. If the house’s own drainage pipe is not set against the wall, the floor drain mesh wall can be moved during the hydropower layout.

 

4. The design of the shower room should be partially elevated or cut off to prevent water flow and avoid splashing. But be sure to use waterproof strips, this is a good choice.


5. The ground drainage slope facing the floor drain is 2% to 3%. When the toilet is backfilled and leveled, it should radiate to all sides with the floor drain as the center. Find the side slope, flatten it with a scraper, the surface is smooth, there are no pits, no gaps, no sand, and no accumulation of water.


6. Non-slip pedals of various materials, customized size to match the size of the shower room. Commonly used materials are anti-corrosion wood, plastic, and melamine resin board. The best foot feeling is anti-corrosion wood, especially in winter, the water will not soak your feet.


Send Inquiry