Adjusting the magnetic attraction of the shower door is a delicate job that requires fine-tuning according to the actual situation. The following are methods for adjusting the magnetic attraction of the shower door based on the search results provided:
1. Check the magnetic attraction status
First, you need to determine whether the magnetic attraction is too large or too small. If the magnetic attraction is too large, it may make the door difficult to close; if the magnetic attraction is too small, the door may not be firmly fixed.
2. Adjust the magnetic attraction
- Reduce the magnetic attraction: If the magnetic attraction is too large, you can try to stick paper or other lightweight materials on the door suction to weaken the magnetic force. In addition, you can also try to disassemble the door suction and move the magnetic steel outward a little to reduce the suction.
- Increase the magnetic attraction: If the magnetic attraction is too small, you should first clean the dust and other debris on the door suction, as these substances may affect the magnetic attraction. If it is still insufficient after cleaning, you can consider replacing a new door suction or adding a strong magnetic sheet to the existing door suction.
3. Reinstall and test
After adjusting the magnetic attraction, you need to reinstall the door stopper and test the door several times to ensure that the magnetic attraction is adjusted to the appropriate state. At the same time, check whether the closing force of the door is between 15-40 Newtons and the smoothness of the hinge.
Through the above steps, you can effectively adjust the magnetic attraction of the shower door so that it can not only firmly fix the door, but also will not affect the normal use of the door due to excessive magnetic force.